Development and Testing of an Energy Efficient Ultra-low Charge Ammonia Refrigeration System in a Food Processing Plant
The project is demonstrating an energy efficient chiller system using a low global warming potential refrigerant at a food processing facility.
The Issue
Most ammonia-based cooling systems in use today require large amounts of ammonia and are prone to leakage from the mechanical shaft seal between the motor and compressor, and require special handling. Additionally, most ammonia systems used today are either water cooled or evaporative cooled, which require water, a very limited and precious resource in California due to recent droughts.
Project Innovation
This project is pilot testing and demonstrating an air-cooled, low-charge ammonia refrigerant-based, integrated package closed cooling system for an industrial food processing application. The project is demonstrating the effectiveness of a water-saving innovation with the use of a micro-channel, air-cooled condenser. The project is demonstrating the expected energy savings of 20% compared to a chiller using hydrofluorocarbon (HFC) refrigerant for similar end use at the same site. This system eliminates the need for water for cooling. The entire system can be prepackaged and factory charged, and brought to site as an integrated package which simplifies field installation and makes it cost effective.
Project Benefits
An air cooled, low-charge, ammonia refrigerant based integrated closed-packaged system with semi-hermetic motor/compressor seal that eliminates the mechanical seal between the compressor and the motor is not available in the U.S market today. As this is a packaged product, the M&V data from this project will help verify the energy savings and benefits and make it easier for customers to understand and implement this new technology and reap the energy and water savings benefits from it.
Lower Costs: Expected energy savings of 20% compared to a chiller using hydrofluorocarbon (HFC) refrigerant for similar end use at the same site. This system eliminates the need for water for cooling, which further adds to on-site cost savings.